{"product_id":"40-inch-wall-to-wall-linear-shower-drain","title":"40 Inch Wall-to-Wall Linear Shower Drain – Flush to Wall, No Tile Strip, Stainless Steel","description":"\u003ch2\u003e40 Inch Wall-to-Wall Linear Shower Drain – Flush to Wall, No Tile Strip, Stainless Steel\u003c\/h2\u003e\n\u003cp\u003eThis 40 inch wall-to-wall linear shower drain installs flush to the back wall and both side walls, so there is no tile strip between the drain and the walls. The Drains Unlimited DUFR-TF model fits a 40 in (1016 mm) stud-to-stud shower opening and is made from 14-gauge 304 stainless steel with a three-side return flange for 1\/8 in to 3\/8 in wall tile.\u003c\/p\u003e\n\n\u003ch3\u003eIs the 40 Inch Drain the Right Size for Your Shower?\u003c\/h3\u003e\n\u003cp\u003eChoose the 40 inch size if your shower measures 40 in between the finish faces of the framing (stud to stud). The visible grate is 37-3\/4 in (959 mm) – the flange covers the rest and sits behind the wall tile. Measure the framing, not the finished tile opening. This drain is also made in sizes from 30 in to 72 in and in custom lengths.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo tile strip at the walls\u003c\/strong\u003e – the drain sits tight to the back and side walls, so there are no narrow cut tiles to set, bond or float like with a standard linear drain.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCleaner, more hygienic floor\u003c\/strong\u003e – fewer grout lines at the wall means fewer places for water, soap scum and mold to collect.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt to last\u003c\/strong\u003e – 14-gauge AISI 304 stainless steel with a rust-resistant, electro-passivated finish.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast drainage\u003c\/strong\u003e – a shallow V-shaped channel bottom moves water quickly to the center outlet on a single-slope floor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecure, watertight install\u003c\/strong\u003e – the flange is fixed to the wall studs, and the textured bonding flange seals tightly to sheet and liquid waterproofing membranes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy to clean\u003c\/strong\u003e – the grate and hair strainer lift out with the included puller key.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrain length\u003c\/th\u003e\n\u003ctd\u003e40 in (1016 mm), measured at the outer edge of the flange (stud to stud)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eVisible grate length\u003c\/th\u003e\n\u003ctd\u003e37-3\/4 in (959 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrate width\u003c\/th\u003e\n\u003ctd\u003e2-1\/2 in (64 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e14-gauge AISI 304 stainless steel, electro-passivated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eChannel\u003c\/th\u003e\n\u003ctd\u003eV-shaped bottom, single slope to drain\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutlet\u003c\/th\u003e\n\u003ctd\u003eCenter outlet, 2 in pipe size (2-3\/8 in OD), vertical no-hub coupling connection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eFlange\u003c\/th\u003e\n\u003ctd\u003eThree-side return bonding flange for 1\/8 in to 3\/8 in thick wall tile\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrate styles\u003c\/th\u003e\n\u003ctd\u003eWedge wire, square perforated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eFinishes\u003c\/th\u003e\n\u003ctd\u003eBrushed stainless steel, polished stainless steel, black powder-coated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eASME A112.18.2 \/ CSA B125.2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e10-year limited manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand \/ Model\u003c\/th\u003e\n\u003ctd\u003eDrains Unlimited DUFR-TF-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eInterior, residential and commercial\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDrain body with three-side return flange\u003c\/li\u003e\n  \u003cli\u003eGrate\u003c\/li\u003e\n  \u003cli\u003eHair strainer\u003c\/li\u003e\n  \u003cli\u003ePuller key\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eThree-Side Flange vs Back Wall Flange – Which Do You Need?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-side return flange (this drain)\u003c\/strong\u003e – for showers with walls on the back and both sides. The drain runs the full width of the shower and is enclosed on three sides.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack wall flange only\u003c\/strong\u003e – for showers with an open end, such as a glass panel or an open-ended bench. It installs against the back wall with no flanges on the ends.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCurbless, walk-in and barrier-free showers\u003c\/li\u003e\n  \u003cli\u003eWet rooms and luxury bathroom remodels\u003c\/li\u003e\n  \u003cli\u003eShowers with large-format floor tile (single-slope floor)\u003c\/li\u003e\n  \u003cli\u003eHotels, spas and multi-family renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe drain must be secured to the wall studs before the wallboard goes on. Slope the mortar bed or pre-sloped tray toward the drain in one direction, then connect the outlet to the waste line with a no-hub coupling. The textured bonding flange works with sheet and liquid waterproofing membranes, including Schluter Kerdi, Laticrete Hydroban, Blanke Aqua-Shield and Mapei systems. Suitable substrates: concrete, exterior-glue plywood (interior use only), cement backer board, cement mortar bed and pre-sloped foam shower pans.\u003c\/p\u003e\n\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eLift out the grate, empty the hair strainer and rinse. Clean the stainless steel with mild soap and water or a stainless steel cleaner, and avoid harsh chlorine-based cleaners.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat size linear drain do I need for a 40 inch shower?\u003c\/h4\u003e\n\u003cp\u003eIf the framing measures 40 in stud to stud, choose this 40 inch drain. The visible grate is 37-3\/4 in, and the flange fills the remaining space behind the wall tile.\u003c\/p\u003e\n\u003ch4\u003eDoes this drain need walls on both sides?\u003c\/h4\u003e\n\u003cp\u003eYes. The three-side flange needs a wall at the back and at both ends. If your shower has an open end, choose the back wall flange only version. A bench that runs the full width between both side walls works as the back wall, as long as it is framed so the drain can be secured to the studs.\u003c\/p\u003e\n\u003ch4\u003eWill it connect to a standard 2 inch drain pipe?\u003c\/h4\u003e\n\u003cp\u003eYes. The center outlet is a 2-3\/8 in outside diameter stainless steel spigot – the same outside size as standard 2 in pipe – so it connects to a 2 in PVC, ABS or cast iron waste line with a standard 2 in no-hub coupling.\u003c\/p\u003e\n\u003ch4\u003eCan I get a custom length or outlet position?\u003c\/h4\u003e\n\u003cp\u003eYes. Custom lengths are available, along with side outlet, offset outlet and 316L stainless steel options. Use the Request Custom Size option to order.\u003c\/p\u003e\n\u003ch4\u003eHow do I stop mold and gunk from building up at the shower wall?\u003c\/h4\u003e\n\u003cp\u003eBuildup usually starts in the narrow tile strip and extra grout lines between a standard linear drain and the wall. This drain installs flush to the walls, so there is no strip to trap water and soap scum, and the removable grate and hair strainer make cleaning quick.\u003c\/p\u003e","brand":"Drains Unlimited","offers":[{"title":"Wedge Wire \/ Brushed Stainless Steel","offer_id":67929084952788,"sku":"DUFR-TF-WW-40-BSS","price":1042.1,"currency_code":"USD","in_stock":true},{"title":"Wedge Wire \/ Polished Stainless Steel","offer_id":67929084985556,"sku":"DUFR-TF-WW-40-PSS","price":1142.4,"currency_code":"USD","in_stock":true},{"title":"Wedge Wire \/ Black Powder-Coated","offer_id":67929085018324,"sku":"DUFR-TF-WW-40-BP","price":1066.75,"currency_code":"USD","in_stock":true},{"title":"Square Perforated \/ Brushed Stainless Steel","offer_id":67929085051092,"sku":"DUFR-TF-SPG-40-BSS","price":986.0,"currency_code":"USD","in_stock":true},{"title":"Square Perforated \/ Polished Stainless Steel","offer_id":67929085083860,"sku":"DUFR-TF-SPG-40-PSS","price":1052.3,"currency_code":"USD","in_stock":true},{"title":"Square Perforated \/ Black Powder-Coated","offer_id":67929085116628,"sku":"DUFR-TF-SPG-40-BP","price":1032.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0404\/1198\/8125\/files\/DUFR-TF-SPG-BSS_-_Wall_to_wall_linear_drain.jpg?v=1731420655","url":"https:\/\/www.showerdrainsshop.com\/products\/40-inch-wall-to-wall-linear-shower-drain","provider":"Shower Drains Shop","version":"1.0","type":"link"}