Skip to product information
1 of 16

Drains Unlimited

40 Inch Wall-to-Wall Linear Shower Drain – Flush to Wall, No Tile Strip, Stainless Steel

40 Inch Wall-to-Wall Linear Shower Drain – Flush to Wall, No Tile Strip, Stainless Steel

Regular price $1,042.10 USD
Regular price $1,012.00 USD Sale price $1,042.10 USD
Sale Sold out
Shipping calculated at checkout.
Grate Design
Finish
Quantity

40 Inch Wall-to-Wall Linear Shower Drain – Flush to Wall, No Tile Strip, Stainless Steel

This 40 inch wall-to-wall linear shower drain installs flush to the back wall and both side walls, so there is no tile strip between the drain and the walls. The Drains Unlimited DUFR-TF model fits a 40 in (1016 mm) stud-to-stud shower opening and is made from 14-gauge 304 stainless steel with a three-side return flange for 1/8 in to 3/8 in wall tile.

Is the 40 Inch Drain the Right Size for Your Shower?

Choose the 40 inch size if your shower measures 40 in between the finish faces of the framing (stud to stud). The visible grate is 37-3/4 in (959 mm) – the flange covers the rest and sits behind the wall tile. Measure the framing, not the finished tile opening. This drain is also made in sizes from 30 in to 72 in and in custom lengths.

Key Benefits

  • No tile strip at the walls – the drain sits tight to the back and side walls, so there are no narrow cut tiles to set, bond or float like with a standard linear drain.
  • Cleaner, more hygienic floor – fewer grout lines at the wall means fewer places for water, soap scum and mold to collect.
  • Built to last – 14-gauge AISI 304 stainless steel with a rust-resistant, electro-passivated finish.
  • Fast drainage – a shallow V-shaped channel bottom moves water quickly to the center outlet on a single-slope floor.
  • Secure, watertight install – the flange is fixed to the wall studs, and the textured bonding flange seals tightly to sheet and liquid waterproofing membranes.
  • Easy to clean – the grate and hair strainer lift out with the included puller key.

Specifications

Drain length 40 in (1016 mm), measured at the outer edge of the flange (stud to stud)
Visible grate length 37-3/4 in (959 mm)
Grate width 2-1/2 in (64 mm)
Material 14-gauge AISI 304 stainless steel, electro-passivated
Channel V-shaped bottom, single slope to drain
Outlet Center outlet, 2 in pipe size (2-3/8 in OD), vertical no-hub coupling connection
Flange Three-side return bonding flange for 1/8 in to 3/8 in thick wall tile
Grate styles Wedge wire, square perforated
Finishes Brushed stainless steel, polished stainless steel, black powder-coated
Standards ASME A112.18.2 / CSA B125.2
Warranty 10-year limited manufacturer warranty
Brand / Model Drains Unlimited DUFR-TF-40
Application Interior, residential and commercial

What's Included

  • Drain body with three-side return flange
  • Grate
  • Hair strainer
  • Puller key

Three-Side Flange vs Back Wall Flange – Which Do You Need?

  • Three-side return flange (this drain) – for showers with walls on the back and both sides. The drain runs the full width of the shower and is enclosed on three sides.
  • Back wall flange only – for showers with an open end, such as a glass panel or an open-ended bench. It installs against the back wall with no flanges on the ends.

Best For

  • Curbless, walk-in and barrier-free showers
  • Wet rooms and luxury bathroom remodels
  • Showers with large-format floor tile (single-slope floor)
  • Hotels, spas and multi-family renovation projects

Installation

The drain must be secured to the wall studs before the wallboard goes on. Slope the mortar bed or pre-sloped tray toward the drain in one direction, then connect the outlet to the waste line with a no-hub coupling. The textured bonding flange works with sheet and liquid waterproofing membranes, including Schluter Kerdi, Laticrete Hydroban, Blanke Aqua-Shield and Mapei systems. Suitable substrates: concrete, exterior-glue plywood (interior use only), cement backer board, cement mortar bed and pre-sloped foam shower pans.

Care

Lift out the grate, empty the hair strainer and rinse. Clean the stainless steel with mild soap and water or a stainless steel cleaner, and avoid harsh chlorine-based cleaners.

FAQ

What size linear drain do I need for a 40 inch shower?

If the framing measures 40 in stud to stud, choose this 40 inch drain. The visible grate is 37-3/4 in, and the flange fills the remaining space behind the wall tile.

Does this drain need walls on both sides?

Yes. The three-side flange needs a wall at the back and at both ends. If your shower has an open end, choose the back wall flange only version. A bench that runs the full width between both side walls works as the back wall, as long as it is framed so the drain can be secured to the studs.

Will it connect to a standard 2 inch drain pipe?

Yes. The center outlet is a 2-3/8 in outside diameter stainless steel spigot – the same outside size as standard 2 in pipe – so it connects to a 2 in PVC, ABS or cast iron waste line with a standard 2 in no-hub coupling.

Can I get a custom length or outlet position?

Yes. Custom lengths are available, along with side outlet, offset outlet and 316L stainless steel options. Use the Request Custom Size option to order.

How do I stop mold and gunk from building up at the shower wall?

Buildup usually starts in the narrow tile strip and extra grout lines between a standard linear drain and the wall. This drain installs flush to the walls, so there is no strip to trap water and soap scum, and the removable grate and hair strainer make cleaning quick.

Shipping Time & Delivery

  • Orders are shipped via USPS, UPS, or FedEx.
  • Most orders ship the same or next business day. The order processing cut-off time is 4:00 PM PST for most items.
  • Standard shipping time is up to 5 business days within the continental U.S. (48 states). Weekends and holidays are not included.
  • For international shipping, Canada, and states outside the contiguous 48 U.S. states, including Hawaii, Puerto Rico, and Alaska, please contact us for a shipping quote.
  • Important: If your address cannot receive deliveries from USPS, UPS, or FedEx, please contact us before placing your order.

Expedited Shipping Options

For overnight or 2–3 business day expedited shipping, please contact us with the product details and complete shipping address to receive a shipping quote.

View full details

Need help with a product? We’re a message away!