Drains Unlimited
30 Inch Wall-Mounted Linear Shower Drain – Against Back Wall, Stainless Steel
30 Inch Wall-Mounted Linear Shower Drain – Against Back Wall, Stainless Steel
Couldn't load pickup availability
30 Inch Wall-Mounted Linear Shower Drain – Against Back Wall, Stainless Steel
Quick answer: This 30 inch wall-mounted linear shower drain – also called a wall-adjacent or near-wall linear drain – installs right against the back wall of your shower, so there is no thin strip of tile between the drain and the wall. The Drains Unlimited DUFR-TN is made from 14-gauge 304 stainless steel, has a back wall flange that slides behind 1/8 in to 3/8 in wall tile, and works in curbed or curbless showers, especially walk-ins with a glass panel or an open end.
Say Goodbye to the Tile Strip
Put a regular linear drain near the wall and you get that skinny strip of cut tile between the drain and the wall. It is fiddly to set, tricky to waterproof, and it loves to collect soap scum. This drain skips it. The flange is secured to the wall studs and tucks behind the wall tile, so the grate meets the finished wall in one clean, unbroken line. Less cutting, simpler waterproofing, and a smooth minimalist look.
The Big Difference: Back Wall Flange Only
The flange runs along the back wall only – not around the ends – so the drain does not have to stretch from side wall to side wall. Place it anywhere along a back wall that is 30 in or longer, centered or off to one side, and let the floor tile run up to each end. It is the right pick when:
- Your walk-in shower has a fixed glass panel
- One end of the shower is open
- Your back wall is longer than the drain
Walls on three sides and want the drain to run the full width? Choose the 30 inch wall-to-wall linear shower drain with a three-side return flange.
Why You'll Love It
- Clean, modern look – flush to the wall with no extra grout lines.
- Built to last – 14-gauge AISI 304 stainless steel, rust-resistant and electro-passivated.
- Drains fast – a shallow V-shaped channel bottom moves water quickly to the center outlet on a single-slope floor.
- Watertight by design – the textured bonding flange seals tightly to sheet and liquid waterproofing membranes.
- Hygienic and barrier-free – fewer joints for grime to hide in, and a smooth floor with no step for curbless showers.
- Easy to clean – the grate and hair strainer lift out with the included puller key.
Pick Your Style
Choose a wedge wire grate (fine slots) or a square perforated grate (classic grid), in brushed stainless steel, polished stainless steel or black powder-coated. Want the drain to almost disappear? The 30 inch tile-in back wall linear drain holds your floor tile in the grate.
Which Size Do I Need?
The drain is measured at the outer edge of the flange, and the visible grate is about 2 in shorter. Want it to run the full width of the back wall? Measure between the finish faces of the framing (stud to stud) and choose that size. This back wall model comes in 30, 32, 34, 36, 40, 42, 44, 48, 54, 60, 66 and 72 in, plus custom lengths. Compare every size in our wall-mounted linear shower drains collection.
Specifications
| Drain length | 30 in (762 mm), measured at the outer edge of the flange |
|---|---|
| Visible grate length | About 2 in shorter than the drain length |
| Grate width | 2-1/2 in (64 mm) |
| Material | 14-gauge AISI 304 stainless steel, electro-passivated |
| Channel | V-shaped bottom, single slope to drain |
| Outlet | Center outlet, 2 in pipe size (2-3/8 in OD), vertical no-hub coupling connection |
| Flange | Back wall return bonding flange only, for 1/8 in to 3/8 in thick wall tile |
| Grate styles | Wedge wire, square perforated (tile-in sold separately) |
| Finishes | Brushed stainless steel, polished stainless steel, black powder-coated |
| Standards | ASME A112.18.2 / CSA B125.2 |
| Warranty | 10-year limited manufacturer warranty |
| Brand / Model | Drains Unlimited DUFR-TN-30 |
| Application | Interior, residential and commercial |
What's in the Box
- Drain body with back wall return flange
- Grate
- Hair strainer
- Puller key
The 2 in no-hub coupling is not included – grab one locally or from your plumber.
See It in Action
Installation in 5 Steps
- Secure it to the studs – fix the drain flange to the wall framing before the wallboard goes on.
- Hang the wallboard and waterproof – the textured flange bonds with sheet and liquid membranes such as Schluter Kerdi, Laticrete Hydroban, Blanke Aqua-Shield and Mapei systems.
- Slope the floor one way – a mortar bed or pre-sloped tray falls toward the drain in a single direction, so large-format floor tile is easy to set.
- Connect the outlet – join the 2-3/8 in OD outlet to your 2 in waste line with a no-hub coupling.
- Tile and drop in the grate – set 1/8 in to 3/8 in wall tile over the flange, finish the floor, and place the grate.
Suitable substrates: concrete, exterior-glue plywood (interior use only), cement backer board, cement mortar bed and pre-sloped foam shower pans.
Where It Shines
- Walk-in showers with a fixed glass panel
- Curbless, barrier-free and curbed showers
- Wet rooms, baths and luxury bathroom remodels
- Hotel rooms, spas, kitchens and other commercial wet areas
Easy Care
Lift out the grate, empty the hair strainer and rinse. Clean the stainless steel with mild soap and water or a stainless steel cleaner, and skip harsh chlorine-based cleaners.
About Drains Unlimited
Drains Unlimited makes linear shower drains in many sizes, styles and finishes, including the DUWR wall-recessed series for a fully concealed look. Custom options include side or offset outlets and 316L stainless steel.
FAQ
What size shower does a 30 inch back wall linear drain fit?
It fits along any back wall that is 30 in or longer. Common choices are 30 x 48 and 30 x 60 showers with a glass panel or an open end, and 36 x 36 or 36 x 48 showers where you want a shorter drain with floor tile at each end. If your shower has walls on the back and both sides and you want the drain to run the full width, choose the three-side flange version instead.
How far should a linear drain be from the wall?
With this drain, zero. A standard linear drain usually sits a few inches off the wall, which leaves a narrow strip of cut tile to set and waterproof. This wall-mounted drain is secured to the wall studs and its flange goes behind the wall tile, so the grate sits right against the finished wall.
Should a linear drain go wall to wall?
Not always. If your shower has walls on the back and both sides, a wall-to-wall drain with a three-side flange gives the cleanest look. If one end is open, has a glass panel, or the back wall is longer than the drain, this back wall version is the right choice – it has no flanges on the ends, so it can sit anywhere along the wall.
Does it work with a glass shower panel?
Yes. With a fixed glass panel or an open walk-in entry, the end of the drain has no side wall to meet, which is exactly what the back wall flange is made for. Set the glass panel on the finished floor tile, not on the drain grate.
Will it connect to a standard 2 inch drain pipe?
Yes. The outlet is made for a no-hub coupling: slide a 2 in no-hub coupling over the drain outlet and your 2 in drain pipe, then tighten the clamps – no glue or threads needed. The coupling is not included, and your plumber can pick the right one for your pipe and local code.
Can I get a custom length or outlet position?
Yes. Custom lengths are available, along with side outlet, offset outlet and 316L stainless steel options. Use the Request Custom Size option to order.
Still deciding? Read our linear shower drain buyer's guide.
Shipping Time & Delivery
Shipping Time & Delivery
- Orders are shipped via USPS, UPS, or FedEx.
- Most orders ship the same or next business day. The order processing cut-off time is 4:00 PM PST for most items.
- Standard shipping time is up to 5 business days within the continental U.S. (48 states). Weekends and holidays are not included.
- For international shipping, Canada, and states outside the contiguous 48 U.S. states, including Hawaii, Puerto Rico, and Alaska, please contact us for a shipping quote.
- Important: If your address cannot receive deliveries from USPS, UPS, or FedEx, please contact us before placing your order.
Expedited Shipping Options
Expedited Shipping Options
For overnight or 2–3 business day expedited shipping, please contact us with the product details and complete shipping address to receive a shipping quote.
