Porcelain Recessed Soap Dish for Shower, White Glossy Wall-Mount 6x4" Soap Holder, Thin Set Installation

Add a clean, timeless touch to your bathroom with this recessed porcelain soap dish for shower. Crafted from premium ceramic materials, it offers lasting durability and a built-in design that saves space while giving your wall a beautiful, seamless look. This wall-mounted 6x4" holder installs easily with thin set and requires no additional waterproofing, making it a smart choice for any shower upgrade. The glossy white finish complements all tile styles, and maintenance is effortless—just clean with all-purpose cleaners to keep it shining like new.

Dimensions:

• Front: 6.5" x 4.5"
• Back Insert: 5.5" x 4"
• Side Projection: 3.25"

Features:

• Made of premium ceramic materials.
• Ready for installation with no need for waterproofing.
• Clean with all-purpose cleaners only.
• Perfect for compact bathrooms and a built-in, stylish look.
• Easy installation with just a few simple steps.

Installation Instructions:

Step 1: Select Location

• Choose a convenient and accessible spot on the wall.
• Ensure there are no pipes, electrical wires, or studs behind the chosen location.
• Mark the position with a pencil, using a level to keep it straight.

Step 2: Cut the Opening

• Measure the recessed portion of the accessory (the part that fits into the wall).
• Transfer those dimensions to the wall, adding about 1/8" clearance.
• Carefully cut the opening using a tile saw for tiled walls or a drywall saw for non-tiled surfaces.

Step 3: Prepare the Surface

• Clean any dust or debris from the cut opening.
• Test-fit the accessory to make sure it sits flush with the wall. Adjust the opening if needed.

Step 4: Insert the Accessory

• Press the accessory firmly into the opening until it sits flush with the wall surface.
• Use a level to ensure it is straight and properly aligned.

Step 5: Seal with Silicone

• Run a clean bead of silicone sealant around all outside edges of the accessory where it meets the tile or wall.
• Smooth the silicone with a damp finger or finishing tool for a neat appearance.
• Allow the silicone to cure fully before use.

Step 6: Final Check

• Confirm the accessory is secure and level.
• Clean the surface with a soft cloth.