SereneDrains Glossy White Ceramic Recessed Toilet Paper Holder, 6x6" Niche Bathroom Tissue Roll

Dimensions

• Front: 6.5" x 6.5"
• Back Insert: 5.5" x 5.5"
• Side Projection: 3.75"

Features

• Made of premium ceramic materials for lasting durability.
• Ready for installation — no waterproofing required.
• Easy to clean using only all-purpose cleaners.
• Ideal for compact bathrooms with a built-in recessed design.
• Available in classic colors to complement any bathroom style.
• Quick installation — complete setup in just a few easy steps.

Note: This holder is designed to fit small and standard toilet paper rolls.
Since roll sizes may vary by brand, we recommend checking your specific roll before installation.

Installation Instructions

Step 1: Select Location

• Choose a convenient and accessible spot on the wall.
• Ensure there are no pipes, electrical wires, or studs behind the chosen area.
• Mark the position with a pencil, using a level to keep it straight.

Step 2: Cut the Opening

• Measure the recessed portion of the accessory (the part that fits into the wall).
• Transfer those dimensions to the wall, adding about 1/8" clearance.
• Carefully cut the opening using a tile saw (for tiled walls) or a drywall saw (for non-tiled surfaces).

Step 3: Prepare the Surface

• Clean any dust or debris from the opening.
• Test-fit the accessory to ensure it sits flush with the wall. Adjust if needed.

Step 4: Insert the Accessory

• Press the accessory firmly into the opening until it sits flush with the wall surface.
• Use a level to ensure it is straight and properly aligned.

Step 5: Seal with Silicone

• Run a clean bead of silicone sealant around all outside edges where the accessory meets the wall.
• Smooth the silicone with a damp finger or finishing tool for a neat appearance.
• Allow the silicone to fully cure before use.

Step 6: Final Check

• Confirm the accessory is secure and level.
• Clean the surface with a soft cloth.